Acrovyn Smooth Sheet provides an easy to clean, durable surface for sterile environments.
It is recommended for hygiene sensitive areas requiring a smooth, impervious surface, which won’t crack under impact and become a breeding ground for bacteria.
The material is resistant to a wide range of chemicals making it suitable for a variety of applications.
Easy to clean surface conforms to EU food hygiene requirements. It is also suitable for steam cleaning to suit stringent cleaning regimes.
- Smooth, impervious and non-porous surface
- Easy to clean and maintain to a high standard
- Suitable for hot steam cleaning
- Resistant to most stains and chemicals
- Easy to cut, form and apply to a variety of substrates
Acrovyn Smooth Sheet has been tested and certified to be suitable for hot steam cleaning (150°C hot steam at 5 bar pressure), making it an ideal solution for areas where stringent cleaning takes place.
Resistant to a wide range of chemicals, including commonly used acids, alkalis, alcohols, grease etc. to suit a wide range of environments. Chemical resistance data available on request.
Due to the limitations of print and computer screens, actual colours may vary. We recommend making any colour selections from our free of charge samples service.
Approximate LRV values for CS Acrovyn colours and finishes have been determined using the CIE Y value measurement method.
Like most materials, Acrovyn Sheets will expand and contract with changes in temperature. If temperature fluctuations are to be expected, it is important to allow for this at sheet edges, in joint positions and around cut outs during installation. A range of finishing options is available.
Mastic sealant is easy to apply and forms an impervious seal. Available in 36 solid colours. Additional colours complementing Decorative Finishes also available. Supplied in 300ml tubes.
Hot Welded Joints
Welded joints creating a durable and seamless finish can be achieved with solid colour 2mm and 1.5mm sheet options. Rods available in 36 solid colours, in rolls of 100m.
For use with all sheet thicknesses, supplied in 3m lengths.
- Edge trim for finishing part height wall applications.
- Vertical Trim - 2-part design for ease of installation.
36 colours (front)
Straight cut edge is standard, 45° or round bevel can be supplied on request.
45° Edge Bevel
Acrovyn Sheets can be formed on site into angles or channels to fit around external or internal corners, columns or skirting boards. Pre-formed sections can be supplied to order.
from 45° to 179°
2mm plinth with a round bevel on the top and a flexible bottom lip. Available in 27 Acrovyn Profile colours.