This one-piece extruded EPDM seal creates a watertight seal when used with high-strength epoxy adhesive.
The serrated edges create epoxy reservoirs and improve adhesion to joint walls.
The closed cell design allows the system to achieve ± 50% movement capability.
Series Details
- Joint Width: up to 100mm
- Horizontal: up to ±50mm
- Vertical: up to ±10mm
- Lateral: up to ±15mm
Movement Details
FLOOR TO FLOOR / FLOOR TO WALL SEALS:
To order any of the below models, please call +44 (0)1296 652800
| Model | Rapid Ship? | Joint Width (mm) | Exposed Surface (mm) | Min. Joint Depth (mm) | Horizontal Movement (mm) | Vertical Movement (mm) | Lateral Movement (mm) |
|---|---|---|---|---|---|---|---|
| HB-200 | NO | 50 | 50 | 78 | ±25 | ±10 | ±10 |
| HB-300 | NO | 75 | 75 | 78 | ±38 | ±10 | ±10 |
| HB-400 | NO | 100 | 100 | 104 | ±50 | ±10 | ±15 |
Materials, Colours & Finishes
EPDM elastomeric seal available in Black as standard.
Fixings
Installed using high-strength epoxy adhesive (supplied by CS).
Note: The standard adhesive used with HB models is not compatible with bituminous finishes, such as asphalt. Please contact us for alternative solutions.
Note: To ensure successful installation of the system, the substrate temperature at the time of installation should be 5°C or above.
Stock Lengths
Supplied cut to suit from [max] 7.5m or 15m rolls.
Accessories
*contact us for details
